Add - Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual

3-4 WS2000 Wireless Switch System Reference Guide
3.2.1 Network AP add Command

add

Network AP Commands
Adds entries to the Access Port adoption list. This allows the Access Ports with the MAC addresses specified
in the command to associate with the specified WLAN.
Performs functionality available in the Access Port Adoption List area of the Wireless screen.
Syntax
add <idx> <mac1> <mac2>
Parameters
<idx>
<mac1>
<mac2>
Example
admin(network.ap)> add 1 00A0F8BFE9B0 00A0F8BFE9B0
admin(network.ap)list 1
admin(network.ap)>list 1
-------------------------------------------------------------------
index start mac
-------------------------------------------------------------------
1 00A0F8BFE9B0
2 001570165200
3 00A0F8B54D68
4 00A0F8BFEE3C
admin(network.ap)>
Related Commands
delete Removes the MAC address range from the adoption list for the specified WLAN.
list Displays entries in the Access Port adoption list.
The WLAN ID (1-8)
The starting mac address for the range
The last mac address in the range
end mac
00A0F8BFE9B0
001570165200
00A0F8B54D68
00A0F8BFEE3C