Network Wan Nat Commands; Add - Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual

3.27.1 Network WAN NAT add Command

add

Network WAN NAT Commands

Adds NAT records.
Syntax
add inb <idx> <name> <tran> <port1> <port2> <ip> <dst_port>
Parameters
inb <idx> <name>
<tran> <port1>
<port2> <ip>
<dst_port>
Example
admin(network.wan.nat)>add inb 2 special tcp 20 21 192.168.42.16 21
admin(network.wan.nat)>list inb 2
-------------------------------------------------------------------------
index name
translation port
-------------------------------------------------------------------------
1 special tcp
Related Commands
delete inb Deletes one of the inbound NAT entries from the list.
list inb Displays the list of inbound NAT entries.
Sets an inbound Network Address Translation (NAT) entry.
• <idx> – The WAN address
• <name> – The NAT entry name
• <tran> – The transport protocol (one of cp, udp, icmp, ah, esp, gre, or all)
• <port1> – The starting port number in a port range
• <port2> – The ending port number in a port range
• <ip> – The internal IP address
• <dst_port> – The optional internal translation port
prot start port
20
Network CLI Commands Reference
end port internal ip
21 192.168.42.16
3-139
21