Move - Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual

3-78 WS2000 Wireless Switch System Reference Guide
3.15.5 Network Firewall Policy Outbound move Command

move

Network Firewall Policy Outbound Commands
Moves an outbound firewall policy up or down in the policy list and renumbers the policy affected by the
move.
Syntax
move [up|down] <idx>
Parameters
[up|down] <idx>
Example
admin(network.fw.policy.outb)>list
-------------------------------------------------------------------------
Idx Src IP-Netmask
-------------------------------------------------------------------------
1 209.239.160.202- 168.192.36.4- gre 20:21
255.255.255.224
2 209.239.179.52-
255.255.255.224
admin(network.fw.policy.outb)>move up 2
admin(network.fw.policy.outb)>list
-------------------------------------------------------------------------
Idx Src IP-Netmask
-------------------------------------------------------------------------
----
1 209.239.179.52-
255.255.255.224
2 209.239.160.202- 168.192.36.4- gre 20:21
255.255.255.224
Moves policy with index <idx> up or down one (to a lower or a higher number) in
the policy list.
Dst IP-Netmask Tp
255.255.255.0
168.192.56.4- all 1:
255.255.255.0
Dst IP-Netmask Tp
168.192.56.4- all 1:
255.255.255.0
255.255.255.0
SPorts DPorts Rev. NAT
200: 0.0.0.0
201 nat port 0
1: 0.0.0.0
65535 65535 nat port 0
SPorts DPorts Rev. NAT
1: 0.0.0.0
65535 65535 nat port 0
200: 0.0.0.0
201 nat port 0
Action
allow
deny
Action
deny
allow