Update - Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual

3-244 WS2000 Wireless Switch System Reference Guide
3.46.6 Network WIPS update Command

update

Network WIPS Command
Sends configuration information to dedicated sensor devices.
Syntax
update <mac> <dhcp_mode> <ipaddr> <mask> <dgw> <pwips> {<swips>}
Parameters
update <mac> <dhcp_mode> <ipaddr> <mask> <dgw> <pwips> {<swips>}
Sends the configuration information to the sensor device, where:
<mac> is the MAC address of the sensor device.
<dhcp_mode> is the dhcp mode. Mode can be either
<ipaddr> is the IP address of the sensor device. This field is only required when the
<dhcp_mode> is
<mask> is the subnet mask for the IP address of the sensor device. This field is only required
when the <dhcp_mode> is
<dgw> is the default gateway for the sensor device. This field is only required when the
<dhcp_mode> is static.
<pwips> is the IP address of the primary WIPS server.
<swips> is the IP address of the secondary WIPS server. This value is optional.
Example
admin(network.wips)> show sensor 00a0f8bf8a70
Sensor MAC
DHCP Mode
IP Address
IP Mask
Default Gateway
Primary WIPS Server
Secondary WIPS Server
admin(network.wips)> update 00a0f8bf8a70 static 192.168.1.108
255.255.255.0 192.168.1.10 192.168 .0.20 192.168.0.21
admin(network.wips)> show sensor 00a0f8bf8a70
Sensor MAC
DHCP Mode
IP Address
IP Mask
Default Gateway
Primary WIPS Server
Secondary WIPS Server
static.
static.
: 00a0f8bf8a70
: client
: 192.168.1.107
: 255.255.255.0
: 192.168.1.1
: 192.168.0.20
: 192.168.0.21
: 00a0f8bf8a70
: client
: 192.168.2.100
: 255.255.255.0
: 192.168.2.1
: 192.168.0.20
: 192.168.0.21
client or static.