Set - Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual

4.5.3 System Logs set Command

set

System Logs Commands
Sets log options and parameters.
Syntax
set [ipadr|level|mode|cf_logging_mode|server|user|passwd]
set ipadr <ip>
set level <level>
set mode <mode>
set cf_logging_mode <mode>
set server <ip>
set user <username>
set passwd <password>
Parameters
ipadr <ip>
level <level>
mode <mode>
cf_logging_mode <mode> Enables or disables logging to CF card if connection to the Syslog server fails.
server <ip>
user <username>
passwd <password>
Example
admin(system.logs)>set user fred
admin(system.logs)>set passwd mygoodness
admin(system.logs)>show all
log level
ext syslog server logging
ext syslog server ip address
ftp/tftp server ip address
ftp user name
ftp password
Sets the external syslog server IP address to <ip> (a.b.c.d).
Sets the level of the events that will be logged. All event with a level at or
above <level> (L0–L7) will be saved in the system log.
• L0:Emergency
• L1:Alert
• L2:Critical
• L3:Errors
• L4:Warning
• L5:Notice
• L6:Info
• L7:Debug
Enables or disables ext syslog server logging. <mode> is either
disable.
<mode> is either enable
Sets the FTP server IP address to <ip> (a.b.c.d).
Sets the FTP user name to <username>
Sets the FTP password to <password>
: L6 Info
: disable
: 0.0.0.0
: 192.168.0.10
: fred
: ********
System CLI Commands Reference
or disable.
(1–47 characters).
(1–39 characters).
4-25
enable or