Management Ip Filter; Management; Table 44: Management Ip Filter Commands - Motorola EX-3524 Cli Reference Manual

Layer 2 gigabit ethernet poe/poe+ switch
Hide thumbs Also See for EX-3524:
Table of Contents

Advertisement

Management IP Filter

management

Backend State Machine
State
Request Count
Identifier(Server)
Reauthentication State Machine
State
802.1X Supplicant is disabled on port 1/50
Console#
This section describes commands used to configure IP management access to the
switch.

Table 44: Management IP Filter Commands

Command
management
show management
This command specifies the client IP addresses that are allowed management
access to the switch through various protocols. Use the no form to restore the
default setting.
Syntax
[no] management {all-client | http-client | snmp-client | telnet-client}
start-address [end-address]
all-client - Adds IP address(es) to all groups.
http-client - Adds IP address(es) to the web group.
snmp-client - Adds IP address(es) to the SNMP group.
telnet-client - Adds IP address(es) to the Telnet group.
start-address - A single IP address, or the starting address of a range.
end-address - The end address of a range.
Default Setting
All addresses
Command Mode
Global Configuration
Chapter 7
: Idle
: 0
: 2
: Initialize
Function
Configures IP addresses that are allowed management
access
Displays the switch to be monitored or configured from a
browser
– 215 –
| Authentication Commands
Management IP Filter
Mode
GC
PE

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ex-3548

Table of Contents