Set - Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual

4-110 WS2000 Wireless Switch System Reference Guide
4.23.1 System Userdb User Guest set Command

set

System User Database User Commands
Sets the parameters for guest users.
Syntax
set [guest-user|start-date|expiry-date]
set guest-user <guest-user> <guest-group>
set start-date <guest-user> <date-time>
set expiry-date <guest-user> <date-time>
Parameters
guest-user
<guest-user>
<guest-group>
start-date
<guest-user>
<date-time>
expiry-date
<guest-user>
<date-time>
Example
admin(system.userdb.user.guest)> set guest-user guest1 GroupOfGuestUsers
admin(system.userdb.user.guest)> show users
Guest Username
Belongs to Group
Start Date Time
Expiry Date Time
admin(system.userdb.user.guest)> set start-date guest1 01:01:2008-00:00
admin(system.userdb.user.guest)> set expiry-date guest1 01:31:2008-23:59
admin(system.userdb.user.guest)> show users
Guest Username
Belongs to Group
Start Date Time
Expiry Date Time
Adds the guest user <guest-user> to the guest user group <guest-group>.
Sets the start date for a guest user <guest-user>. This is the date and time
combination from when a guest user can access the resources. <date-time> value
must be in the MM:DD:YYYY-hh:mm format (02:24:2008-21:06).
Sets the date when the guest user account <guest-user> expires. This is the date and
time combination after which the account becomes inactive. <date-time> value must
be in the MM:DD:YYYY-hh:mm format (02.24:2008-21:06).
: guest1
: GroupOfGuestUsers
: 01:16:1970-01:10
: 01:17:1970-01:10
: guest1
: GroupOfGuestUsers
: 01:01:2008-00:00
: 01:31:2008-23:59