Igmp Static Multicast Router Configuration; Igmp Filtering Configuration - HP 445860-B21 - 10Gb Ethernet BL-c Switch Reference Manual

IGMP static multicast router configuration

The following table describes the Static Multicast Router Configuration commands.
NOTE: When you configure a static multicast router on a VLAN, the process of learning multicast
routers is disabled for that VLAN.
IGMP Static Multicast Router commands
Table 141
Command
ip igmp mrouter <port number>
<1-4094> <1-3>
no ip igmp mrouter <port
number> <1-4094> <1-3>
ip igmp mrouter portchannel
{<trunk number (1-12)>|<LACP
trunk (13-40>} <1-4094> <1-3>
no ip igmp mrouter portchannel
{<trunk number (1-12)>|<LACP
trunk (13-40>} <1-4094> <1-3>
show ip igmp mrouter

IGMP filtering configuration

The following table describes the IGMP Filter Configuration commands.
IGMP Filtering commands
Table 142
Command
ip igmp profile <1-16>
ip igmp filtering
no ip igmp filtering
show ip igmp filtering
Description
Selects a port/VLAN combination on which the static multicast router
is connected, and configures the IGMP version (1, 2, or 3) of the
multicast router.
Command mode: Global configuration
Removes a static multicast router from the selected port/VLAN
combination.
Command mode: Global configuration
Selects a trunk group/VLAN combination on which the static multicast
router is connected, and configures the IGMP version (1, 2, or 3) of
the multicast router.
Command mode: Global configuration
Selects a trunk group/VLAN combination on which the static multicast
router is connected, and configures the IGMP version (1, 2, or 3) of
the multicast router.
Command mode: Global configuration
Displays the current IGMP Static Multicast Router parameters.
Command mode: All except User EXEC
Description
Configures the IGMP filter.
Command mode: Global configuration
Enables IGMP filtering globally.
Command mode: Global configuration
Disables IGMP Filtering globally.
Command mode: Global configuration
Displays the current IGMP Filtering parameters.
Command mode: All except User EXEC
Configuration Commands
160