Igmp Static Multicast Router Configuration; Igmp Filtering Configuration - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Command Reference Manual

IGMP static multicast router configuration

Command: /cfg/l3/igmp/mrouter
[Static Multicast Router Menu]
add - Add port as Multicast Router Port
rem - Remove port as Multicast Router Port
cur - Display current Multicast Router configuration
The following table describes the Static Multicast Router Configuration Menu options.
NOTE: When you configure a static multicast router on a VLAN, the process of learning multicast
routers is disabled for that VLAN.
IGMP Static Multicast Router Menu
Table 145
Command
add <port number> <1-4094> <1-3>
remove <port number> <1-4094>
cur

IGMP filtering configuration

Command: /cfg/l3/igmp/igmpflt
[IGMP Filter Menu]
filter - IGMP Filter Definition Menu
port - IGMP Filtering Port Menu
ena - Enable IGMP Filtering
dis - Disable IGMP Filtering
cur - Display current IGMP Filtering configuration
The following table describes the IGMP Filter Configuration Menu options.
IGMP Filtering Menu options
Table 146
Command
filter <1-16>
port <port number>
ena
dis
cur
Description
Selects a port/VLAN combination on which the static multicast
router is connected, and configures the IGMP version (1, 2, or 3)
of the multicast router.
Removes a static multicast router from the selected port/VLAN
combination.
Displays the current IGMP Static Multicast Router parameters.
Description
Displays the IGMP Filter Definition Menu.
Displays the IGMP Filtering Port Menu.
Enables IGMP filtering globally.
Disables IGMP Filtering globally.
Displays the current IGMP Filtering parameters.
Configuration Menu
164