Download  Print this page

Static Multicast Router Configuration For Port - HP 445860-B21 - 10Gb Ethernet BL-c Switch Reference Manual

Hp 10gb ethernet bl-c switch browser-based interface reference guide.
Hide thumbs

Advertisement

Static Multicast Router Configuration for Port

To display the following form, go to the IGMP Static Multicast Router Configuration form. Select an
Mrouter Port number, or open the IGMP Static Mrouter folder and click Add Mrouter.
NOTE:
When you configure a static multicast router on a VLAN, the process of learning multicast
routers is disabled for that VLAN.
The following table describes the Static Multicast Router Configuration for Port controls:
Static Multicast Router Configuration for Port
Table 150
Control
Mrouter Port ID
Vlan ID
IGMP Version?
Description
Selects a port on which the static multicast router is connected.
Port number must be an external port (18-21).
NOTE:
Selects a VLAN on which the static multicast router is connected.
Configures the IGMP version (1 or 2) of the multicast router.
Configuring the switch
221

Advertisement

Table of Contents

   Related Manuals for HP 445860-B21 - 10Gb Ethernet BL-c Switch

   Related Content for HP 445860-B21 - 10Gb Ethernet BL-c Switch

Comments to this Manuals

Symbols: 0
Latest comments: