82
C
3: I
HAPTER
NSTALLATION AND
I
S
NITIAL
ETUP
Figure 18 Login Dialog Box
2 Minimize the EMS GUI command prompt window.
3 In the Login dialog box, type a valid User ID, Password, and Server IP
address/host name.
If this is the first time running an EMS GUI client, type the User ID
Administrator. Initial installation provides the Administrator user with no
password. The Server field should be the IP address of the EMS server, or
type localhost if you are running the EMS GUI client on the same
workstation as the EMS server.
When you run the EMS GUI client the next time, EMS will remember the
previous login parameters. At that time, simply type your Password and
click OK.
4 Click Login.
The EMS GUI main window and Advisor opens. See
Figure 19
.