3Com 3CR15600 - Enterprise Management Suite Getting Started Manual page 105

Table 29 Discovery Parameters (continued)
Parameter
Read Community
Write Community
If you are using SNMPv1 or v2c, go to step 8. If you are using v3, continue
with step 4.
4 When you select v3 for the SNMP Version, the dialog box changes to
reveal three new fields. See
Figure 24 Dialog Box for SNMPv3 with No Authentication
Discovering Multiple SNMP Devices
Description
The SNMP Read Community string for access to the
devices. This should match the Read Community
string of the devices to be discovered.
The SNMP Write Community string. This should
match the Write Community string of the devices to
be discovered.
Figure 24 .
105