Using The Mib Browser; Starting The Mib Browser; Getting And Setting Mib Values - 3Com 3CR15600 - Enterprise Management Suite Getting Started Manual

Using the MIB
Browser
Starting the MIB
Browser
Getting and Setting
MIB Values
The Update dialog box opens and EMS updates the state.
3 When the Working icon changes to a Finished icon, click Close.
EMS contains an internal MIB browser that allows you to get and set
Managed Information Base (MIB) values of compiled MIBs that are either
distributed with EMS or integrated by 3Com Customer Services. Some
MIB values available in the browser may either be unsupported or simply
not available through the GUI client.
To start the MIB browser:
1 In the explorer tree, select an SNMP device.
2 Right-click the SNMP device and select Browse MIB from the pop-up
menu.
The MIB browser window opens.
To get or set a particular MIB value:
1 In the MIB browser explorer tree, navigate and select a MIB module (for
example, SIP-MIB).
2 Navigate to the MIB object level (leaf level).
3 In the right pane, edit the Name as desired.
You can add
.index1 [index2]
column.
4 Click Get to get the value of the MIB object.
5 Depending on the type of MIB object, edit the Value or Enumeration field
as desired.
If the field is not editable, the field is unavailable (grayed out).
6 Click Set.
7 From the File menu, click Exit to close the MIB Browser.

Using the MIB Browser

to specify the Get or Set of a table
181