Creating Equipment Bays And Racks - 3Com 3CR15600 - Enterprise Management Suite Getting Started Manual

102 C 5: SNMP D
HAPTER
Creating Equipment
Bays and Racks
C
EVICE ONFIGURATION
3 From the pop-up menu, select New and then select Equipment Folder.
The New dialog box appears.
4 Type a label and click OK.
The device folder you just created appears as a sub-folder under the
Equipment root folder. Now you can add SNMP devices to the folder, or
create equipment bays and racks. For more information, see
Single SNMP Devices
page 103, and

Creating Equipment Bays and Racks

To organize SNMP devices, you can create virtual equipment bays and
racks. Bays and racks are specialized containers you can create in
individual sub-folders under the Equipment root folder. Bays contain racks
but racks cannot contain bays.
To create an equipment bay or a rack:
1 First, create a device folder under the Equipment root folder. If you do not
have one, see Creating Device Folders
2 In the explorer tree, select a sub-folder under the main Equipment folder.
.
See Figure 22
Figure 22 Selecting an Equipment Folder
on page 108, Discovering Multiple SNMP Devices
on
Discovering
on page 102.
page 101.
on