Uncommenting The Snmp.trap.threads Line; Trap Forwarding Based On Ip Addr Range Setting; Event Type Tab - 3Com 3CR15600 - Enterprise Management Suite Getting Started Manual

162 C 9: N
HAPTER ETWORK
Uncommenting the
SNMP.trap.Threads
Line
Trap Forwarding
Based on IP addr
Range Setting
M P
ANAGEMENT LATFORM
Figure 55 Uncommenting the SNMP.trap.QueueSize Line
remove the pound sign
#
SNMP.trap.QueueSize=2000
8 Edit the queue size to suit your needs. The default is 2000.
9 Set the number of processing threads.
10 Uncomment the SNMP.trap.Threads line. See .
remove the pound sign
#
SNMP.trap.Threads=1
11 Edit the thread size to suit your needs. The default is 1.
12 Save the file.
13 Restart the EMS Server.
The Trap Forwarding dialog found under the Tools menu lets you decide
whether to forward traps based on trap type and source IP address.
1 Select Tools > Trap Forwarding to display the Trap Forwarding dialog as
shown in Figure
Ranges.

Event Type Tab

The Event Type tab contents are shown in
I C
NTEGRATION ONFIGURATION
56. The dialog has two tabs: Event Type and IP Address
Figure 56.