3Com 3CR15600 - Enterprise Management Suite Getting Started Manual page 205

To change the table data loading from one mode to the other, do one of
the following steps:
1 If the Table loading indicator is green: EMS is set to load table data
continuously. Click Table loading.
The Table loading indicator changes to red, and EMS changes to loading
the table data line by line as you scroll down in a full on-screen table
display.
2 If the Table loading indicator is red: EMS is set to load table data line by
line as you scroll down in a full on-screen table display. Click Table
loading.
The Table loading indicator changes to green, and EMS changes to
loading the table data continuously.
Configuring Table Data Loading 205