Table of Contents
Advertisement
Monitoring EMS
Server Memory
4 Select the Statistics tab and select any of the EMS server statistics you
would like to monitor and graph performance data for.
5 At the bottom of the Server Monitor window, click Poll Rate to set the
refresh rate for the server monitor.
The default is five seconds.
6 Click Start to begin the server monitor.
In the field next to each statistic, the Server Monitor window displays the
current performance data.
Click "Pause" to pause monitoring and click "Continue" to resume
monitoring. While the server monitor is running, you can check how
many Active users are using the EMS server. See
information.
7 Click Close when you are finished.
To monitor the amount of memory the EMS server is using:
1 Start the Server Monitor.
For more information, see
Server Performance
2 From the Server Monitor window, select the Memory tab.
3 Click Start to begin the server monitor. See
Monitoring EMS Server Memory
Using the Server Monitor to Monitor EMS
on
page
199.
Figure 77
for more
Figure 78
for the Memory tab.
201
Advertisement
Table of Contents
