Table of Contents
Advertisement
TFTP for UNIX and
Linux
5 Check the checkbox following Allow overwrite of existing files. This is
necessary in order for backups to work.
6 Click OK.
The 3Com TFTP Server application reappears.
Continue with the next section
TFTP Server Software for Windows
Initially Configuring EMS for the 3Com TFTP Server Software for
Windows
In order for the Enterprise Management Suite to correctly work with the
TFTP Server, you need to point the EMS Server to the same Upload /
download directory that was configured for the 3Com TFTP Server. See
the preceding section
Windows Software
1 Locate the server.properties file for the EMS Server. The default location is
C:\Program Files\3Com\EMS\.
2 Open the file using a text editor.
3 Locate the tftp SERVER heading.
4 From the tftpServer.tftpbootDirectory= entry, type the same path that
was entered in the Upload / download directory field for the 3Com TFTP
Server. In Windows, you must use double backslashes as shown below.
tftpServer.tftpbootDirectory=c:\\Program Files\\3Com\\TFTP
Server\\tftpboot
5 Save the file.
This section provides instructions on how to initially configure EMS to
work with the TFTP Server software on either a UNIX or Linux
platform.
Both UNIX and Linux operating systems come with a built-in TFTP server,
which needs to be turned on. See the platform documentation for
instructions on any necessary TFTP Server configuration.
1 Locate the server.properties file for the EMS Server. The default location is
<EMS_HOME>/.
2 Open the file using a text editor.
3 Locate the tftp SERVER heading.
TFTP Server Installation and Initial Configuration
Initially Configuring EMS for the 3Com
on
page
Initially Configuring the 3Com TFTP Server for
on
page 50
for more information.
51.
51
Advertisement
Table of Contents
