Table of Contents
Advertisement
Printing the EMS
GUI Explorer Tree
Starting and
Stopping EMS
Software
Components
Starting the EMS
Server
Starting the EMS
Server as a Daemon
AuditLog-yyyymmdd.log — These log files are created if the
■
AuditLog field is set to yes in the server.properties file.
ftplog/ — The log files in this folder contain a detailed list of all FTP
■
activity on the EMS server. Use this log to diagnose file transfer
problems between network elements and EMS.
General Help — An HTML version of this document.
■
Readme — A document providing basic installation notes,
■
workstation requirements, and last-minute issues related to EMS.
EMS allows you to print just the explorer tree for your own customized
needs. For more information about different printing options using EMS,
see
Printing Options
To print the EMS GUI explorer tree:
1 Before printing the explorer tree, configure the printer page setup.
2 From the main menu, select the Tree menu and then select Print Tree.
A standard Print dialog box opens.
3 Select the printer you want to print from.
4 Configure the print job according to your customized needs (also, select
the number of copies), and click OK.
Use the following procedures to start and stop EMS server, GUI client,
and CLI client components.
To start the EMS server, see
To access the server console commands available, see
Console Commands
You can run the EMS server as a background process, detached from the
terminal that launched it, or as a fully operational daemon. This is
especially important on systems that are generally unattended or have no
direct terminal interface. In such a state, there is no interactive EMS server
command prompt available to the user and all EMS server interaction
Printing the EMS GUI Explorer Tree
on
page
36.
"Installation and Initial Setup"
on
page
203.
195
on
page
55.
Displaying Server
Advertisement
Table of Contents
