3Com 3CR15600 - Enterprise Management Suite Getting Started Manual page 106

106 C 5: SNMP D
HAPTER
C
EVICE ONFIGURATION
5 In the Discovery dialog box, enter the appropriate SNMPv3 parameters.
See Table 30.
Table 30 Additional Discovery Parameters for SNMPv3 with No Authentication
Parameters
Context Name
Contact Engine ID
6 To use authentication for SNMPv3, select MD5 from the Authentication
drop-down list.
The Discovery dialog box changes to reveal three new fields. See
Figure 25 .
Figure 25 Dialog Box for SNMPv3 with Authentication and No Encryption
MD5 is the only authentication protocol supported for this release.
7 In the Discovery dialog box, enter the appropriate parameters.
Description
For SNMPv3, leave this field blank.
For SNMPv3, enter #.