3Com 3CR15600 - Enterprise Management Suite Getting Started Manual page 110

110 C 5: SNMP D
HAPTER
C
EVICE ONFIGURATION
5 In the New Device dialog box, enter the appropriate SNMPv3 parameters.
.
See Table 33
Table 33 Additional Discovery Parameters for SNMPv3 with No Authentication
Parameter
Context Name
Contact Engine ID
6 To use authentication for SNMPv3, select MD5 from the Authentication
drop-down list.
The New Device dialog box changes to reveal three new fields. See
Figure 28 .
Figure 28 Dialog Box for SNMPv3 with Authentication and No Encryption
MD5 is the only authentication protocol supported for this release.
7 In the New Device dialog box, enter the appropriate parameters. See
Table 34 .
Description
For SNMPv3, leave this field blank.
For SNMPv3, enter #.