Importing Ems Users; User Passwords; Resetting User Passwords - 3Com 3CR15600 - Enterprise Management Suite Getting Started Manual

138 C 7: U
HAPTER SER

Importing EMS Users

User Passwords

Resetting User
Passwords
C
ONFIGURATION
For example:
c:\EMS
3 When finished, click Close.
4 If you are going to use this list of users for another EMS server, copy and
paste the text file from this workstation into the directory on the other
EMS server where the EMS software files are located.
To import users:
1 Make sure the user.tsv file is saved in the root directory folder where the
EMS software files are located.
For example:
c:\EMS
2 In the explorer tree, right-click the Users root folder.
A pop-up menu appears.
3 From the pop-up menu, select User and then select Import.
The Users:Import dialog box appears.
EMS imports the list of users into the EMS GUI client and creates a new
user in the explorer tree for each user found in the user.tsv file. Also, all
user access rights and root views are mirrored from the user.tsv file.
4 When finished, click Close.
User passwords can be changed (must know current password) or reset
(in case the password in unknown).
Once a password is reset, it can be changed to the user's preference. A
password is reset to be blank.
To reset a user password:
1 In the explorer tree, select a user under the Users root folder.
2 Right-click the user, and select Reset Password from the pop-up menu.
The Operation complete dialog box appears. See
Figure 42
.