Displaying Ems Cli Client Console Commands; Configuring Table Data Loading; A Command Line Interface Reference - 3Com 3CR15600 - Enterprise Management Suite Getting Started Manual

204 C 10: O
HAPTER PERATIONS
Displaying EMS CLI
Client Console
Commands
Configuring Table
Data Loading
Figure 80 shows the list of available EMS server console commands.
Figure 80 EMS Server Console Commands
For a comprehensive list of all EMS server console commands and their
functions, see EMS Server Console
To display the list of available EMS server console commands:
1 Start the EMS CLI client using one of the options listed in
Stopping EMS Software Components
If you start the EMS server as a daemon or background process, see
Command Line Interface Reference
2 From the EMS server console, enter ? or help.
For a comprehensive list of all EMS CLI client console commands and their
functions, see EMS CLI Client
With the Table loading control on the EMS toolbar, you can select how
EMS loads table data. With two table loading modes, you can control
whether table data is loaded either
Continuously
■
Line by line as you scroll down in a full on-screen table display.
■
The default data loading mode for EMS is line by line table loading.
on page 207.
on page 195.
on page 207.
on page 209.
Starting and