Monitoring Ems Gui Memory - 3Com 3CR15600 - Enterprise Management Suite Getting Started Manual

202 C 10: O
HAPTER PERATIONS
Monitoring EMS
GUI Memory
Figure 78 Memory Tab on the EMS Server Monitor
At the left-hand side of the Memory tab, you can monitor the amount of
memory available and the amount of memory currently being used.
4 When finished, click Close.
To monitor the amount of memory the EMS GUI client is using:
1 Start the EMS GUI client.
For more information, see
2 From the EMS GUI main menu, select the Tools menu and then select
Memory Monitor. See
window.
Installation and Initial Setup
Figure 79 for the GUIClient Memory Monitor
on page 55.