Configuring A Dynamic Address Pool - Dell PowerConnect 8024 User Configuration Manual

Configuring a Dynamic Address Pool

Beginning in Privileged EXEC mode, use the following commands to create
an address pool with network information that is dynamically assigned to
hosts with DHCP clients that request the information.
Command
configure
name
ip dhcp pool
network-ip
network
mask prefixlength
[ |
duration
lease [ ] |
infinite}]
address1
default-router
address2....address8
[
address1
dns-server
address2....address8
[
domain
domain-name
code
option {ascii
string1
| hex
string2...string8
] | ip
[
address1
address2...address8
[
CTRL + Z
show ip dhcp pool
name
configuration {
all}
Purpose
Enter Global Configuration mode.
Create a DHCP address pool and enters DHCP pool
configuration mode.
Configure the subnet number and mask for a DHCP
] address pool. Clients requesting an IP address can be
assigned any non-excluded IP address within this network.
Specify the duration of the lease for an IP address that is
assigned from a DHCP server to a DHCP client.
duration
•
specify the hours and minutes after specifying the days.
• infinite — 60 day lease
Specify the list of default gateway IP addresses to be
] assigned to the DHCP client.
Specify the list of DNS server IP addresses to be assigned
] to the DHCP client.
Specify the domain name for a DHCP client.
string
Manually configure DHCP options.
]}
Exit to Privileged EXEC mode.
View the settings for the specified address pool or for all
| configured address pools.
— Days the lease is valid. You can optionally
Configuring DHCP Server Settings
887