Manage Differentiated Services; Overview Of Defining Diffserv - NETGEAR GC728X User Manual

Insight Managed 28-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP 1G & 2 SFP+ 10G Fiber Ports
The traffic class is the hardware queue for a port. Higher traffic class values indicate a
higher queue position. Before traffic in a lower queue is sent, it must wait for traffic in
higher queues to be sent.
The allowed Per Hop Behavior (PHBs) values, apart from other DSCP experimental
values, are as follows:
• Class Selector (CS) PHB. These values are based on IP precedence.
• Assured Forwarding (AF) PHB. These values define four main levels to sort and
manipulate some flows within the network.
• Expedited Forwarding (EF) PHB. These values are used to prioritize traffic for
real-time applications. In many situations, if the network exceeded traffic and you
need some bandwidth guaranteed for an application, the EF traffic must receive this
rate independently of the intensity of any other traffic attempting to transit the node.
7. Click the Apply button.
Your settings are saved.

Manage Differentiated Services

The QoS feature contains Differentiated Services (DiffServ) support that allows traffic to be
classified into streams and given certain QoS treatment in accordance with defined per-hop
behaviors.
Standard IP-based networks are designed to provide best effort data delivery service. Best
effort service implies that the network delivers the data in a timely fashion, although it is not
guaranteed. During times of congestion, packets might be delayed, sent sporadically, or
dropped. For typical Internet applications, such as email and file transfer, a slight degradation
in service is acceptable and in many cases unnoticeable. Conversely, any degradation of
service can negatively affect applications with strict timing requirements, such as voice or
multimedia.

Overview of Defining DiffServ

To use DiffServ for QoS, you must first define the following categories and their criteria:
1. Class. Create classes and define class criteria.
2. Policy. Create policies, associate classes with policies, and define policy statements.
3. Service. Add a policy to an inbound interface.
Packets are classified and processed based on defined criteria. The classification criteria are
defined by a class. The processing is defined by a policy's attributes. Policy attributes can be
defined on a per-class instance basis, and it is these attributes that are applied when a match
occurs. A policy can contain multiples classes. When the policy is active, the actions taken
depend on which class matches the packet.
Packet processing begins by testing the class match criteria for a packet. A policy is applied
to a packet when a class match within that policy is found.
Configure Quality of Service
228