Output Stacker; Using The Stationary Output Stacker - Canon imagePROGRAF iPF830 User Manual

iPF830

Output Stacker

Output Stacker
Stationary Output Stacker .............................................................................................................................. 467

Using the Stationary Output Stacker ............................................................................................................... 359

Stowing the Stationary Output Stacker ........................................................................................................... 360
Wheeled Output Stacker ................................................................................................................................ 362
Using the Wheeled Output Stacker ............................................................................................................362
Using the Stationary Output Stacker
Using the Stationary Output Stacker
The Stationary Output Stacker can be used in three positions, as shown.
When storing printed documents on the Output Stacker
•
Use position (1).
• When the Output Stacker is not used
Move the stacker into position (2).
When the Media Take-up Unit is used, or when the Output Stacker is stored for long periods
•
Lower it to position (3) for storage. (See "Stowing the Stationary Output Stacker.")
When using the Output Stacker again after storage, reattach the Basket Rod on the front of the Output Stacker
to the tips of the left and right basket arms and pull the side rods out completely.
When printing on large, stiff sheets
•
Use position (3).
User's Guide
2
1
3
2
1
3
Using the Stationary Output Stacker
P.360
➔
359