Using The Stationary Output Stacker - Canon iPF815 User Manual

f. Rear Holder
Holds the middle of the Basket Rod (cord side).
(See "Using the Stationary Output Stacker.")
Note
• The printer can be used with either a Stationary Output Stacker or a separate, mobile Wheeled Output
Stacker.
The Stationary Output Stacker is normally provided as the standard stacker, but the Wheeled Output
Stacker may be the standard stacker in some sales regions. If the Wheeled Output Stacker has been pro-
vided as the standard stacker, the Stationary Output Stacker is not included.
For more information about the Wheeled Output Stacker, see "Wheeled Output Stacker."

Using the Stationary Output Stacker

The Stationary Output Stacker can be used in three positions, as shown.
• When storing printed documents on the Output Stacker
Use position (1).
• When the Output Stacker is not used
Move the stacker into position (2).
• When the Media Take-up Unit is used, or when the Output Stacker is stored for long periods
Lower it to position (3) for storage. (See "Stowing the Stationary Output Stacker.")
When using the Output Stacker again after storage, reattach the Basket Rod on the front of the Output Stacker to
the tips of the left and right basket arms and pull the side rods out completely.
• When printing on large, stiff sheets
Use position (3).
iPF815
→P.615
Handling Paper > Output Stacker
→P.619
→P.617
Using the Stationary Output Stacker
>
7
615