•
Radius Servers—Allows you to set Radius server parameters that the switch uses to communicate
the authentication information to the designated Radius servers.
Figure 42
Configure SANtegrity Authentication dialog box
Backing up HAFM configuration data
It is important to back up the HAFM configuration data. This data is used to restore the HAFM
appliance operating environment in case of hard drive failure.
Refer to the HP StorageWorks HA-Fabric Manager Appliance installation guide for instructions on
backing up the HAFM configuration data.
Configuring Open Systems Management Server
For complete procedures on configuring this optional feature, refer to the HP StorageWorks Director
Element Manager user guide.
Configuring FICON Management Server
For complete procedures on configuring this optional feature, refer to the HP StorageWorks Director
Element Manager user guide.
Configuring feature key
For complete procedures on configuring this feature, refer to the HP StorageWorks Director Element
Manager user guide.
Configuring Open Trunking
This option is only available if the Open Trunking feature is installed. For details on Open Trunking
and configuring parameters such as congestion thresholds for ports, event notification options, and
low BB credit threshold, refer to the HP StorageWorks Director Element Manager user guide.
Director 2/140 installation guide
71