Problems with products
Table 19
describes possible product problems and suggested resolutions.
Table 19
Product problems and resolutions
Problem
HBAs not connected to SAN
Switches not connected to
Ethernet
Switches not connected to
SAN
Cannot disable fabric
binding while enterprise
fabric mode is active
Problems with addresses
Table 20
describes possible problems with addresses and suggested resolutions.
Table 20
Address problems and resolutions
Problem
No subnets or addresses
selected
Wrong IP addresses
selected
Wrong community strings
are selected
Resolution
Check your physical cables and connectors.
Check your physical cables and connectors.
Check your physical cables and connectors.
Disable the Enterprise Fabric Mode through the
Enterprise Fabric Mode dialog box before
disabling fabric binding.
Resolution
Select Discover > Setup.
1.
2.
Click on the subnet or individual address you
would like to discover in the Available
Addresses list.
3.
Click
to move your choice to the Selected
Subnets list, or to the Selected Individual
Addresses list.
Click OK.
4.
1.
Select Discover > Setup.
2.
Verify that the IP addresses in the Selected
Subnets and Selected Individual Addresses
lists are the correct current addresses for the
SAN.
Click OK.
3.
Select Discover > Setup.
1.
2.
Select an IP address.
3.
Click Change.
4.
Select the desired community strings.
Click OK.
5.
HA-Fabric Manager user guide 179