Required Tools; Rack Mount Procedure; Brackets Included In Kit - HP StorageWorks Edge Switch 2/12 Installation Manual

Installing and Configuring the Edge Switch 2/12
Figure 4: Brackets included in kit

Required Tools

The following tools are required:

Rack Mount Procedure

Follow this procedure to rack mount the HP StorageWorks Edge Switch 2/12 in
the appropriate HP, or comparable, 19-inch Electronic Industries Association
(EIA) rack:
36
5
Torx driver with a T10 Torx bit
#2 Phillips screwdriver (not included in the kit)
HP 9000 series, 10000 series, or 11000 series racks
HP system/e or 19-inch EIA rack
1
2
3
4
Edge Switch 2/12 Installation Guide