Vlan Features - Cisco WS-CBS3032-DEL Software Configuration Manual

Chapter 1 Overview
•
•
•

VLAN Features

These are the VLAN features:
•
•
•
•
•
•
•
•
•
•
•
•
OL-13270-06
Flex Link Layer 2 interfaces to back up one another as an alternative to STP for basic link
redundancy
Link-state tracking to mirror the state of the ports that carry upstream traffic from connected hosts
and servers and to allow the failover of the server traffic to an operational link on another Cisco
Ethernet switch
Support for VTP version 3 that includes support for configuring extended range VLANs (VLANs
1006 to 4094) in any VTP mode, enhanced authentication (hidden or secret passwords), propagation
of other databases in addition to VTP, VTP primary and secondary servers, and the option to turn
VTP on or off by port.
Support for up to 1005 VLANs for assigning users to VLANs associated with appropriate network
resources, traffic patterns, and bandwidth
Support for VLAN IDs in the 1 to 4094 range as allowed by the IEEE 802.1Q standard
VLAN Query Protocol (VQP) for dynamic VLAN membership
IEEE 802.1Q trunking encapsulation on all ports for network moves, adds, and changes;
management and control of broadcast and multicast traffic; and network security by establishing
VLAN groups for high-security users and network resources
Dynamic Trunking Protocol (DTP) for negotiating trunking and encapsulation on a link between two
devices
VLAN Trunking Protocol (VTP) and VTP pruning for reducing network traffic by restricting
flooded traffic to links destined for stations receiving the traffic
Voice VLAN for creating subnets for voice traffic from Cisco IP Phones
Dynamic voice virtual LAN (VLAN) for multidomain authentication (MDA) to allow a dynamic
voice VLAN on an MDA-enabled port
VLAN 1 minimization for reducing the risk of spanning-tree loops or storms by allowing VLAN 1
to be disabled on any individual VLAN trunk link. With this feature enabled, no user traffic is sent
or received on the trunk. The switch CPU continues to send and receive control protocol frames.
Private VLANs to address VLAN scalability problems, to provide a more controlled IP address
allocation, and to allow Layer 2 ports to be isolated from other ports on the switch
Port security on a PVLAN host to limit the number of MAC addresses learned on a port, or define
which MAC addresses may be learned on a port
VLAN Flex Link Load Balancing to provide Layer 2 redundancy without requiring Spanning Tree
Protocol (STP). A pair of interfaces configured as primary and backup links can load balance traffic
based on VLAN.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
Features
1-9