Cisco WS-CBS3032-DEL Software Configuration Manual page 69

Software guide
Table of Contents

Advertisement

Chapter 1
Overview
Port-based traffic
CDP is enabled. For more information, see
UDLD is disabled. For more information, see
SPAN and RSPAN are disabled. For more information, see
RSPAN."
RMON is disabled. For more information, see
Syslog messages are enabled and appear on the console. For more information, see
"Configuring System Message Logging."
SNMP is enabled (Version 1). For more information, see
No ACLs are configured. For more information, see
with ACLs."
QoS is disabled. For more information, see
No EtherChannels are configured. For more information, see
EtherChannels and Link-State Tracking."
IP unicast routing is disabled. For more information, see
Routing."
No HSRP groups are configured. For more information, see
VRRP."
IP multicast routing is disabled on all interfaces. For more information, see
"Configuring IP Multicast Routing."
MSDP is disabled. For more information, see
Fallback bridging is not configured. For more information, see
Bridging."
OL-13270-06
Broadcast, multicast, and unicast storm control is disabled. For more information, see
Chapter 26, "Configuring Port-Based Traffic Control."
No protected ports are defined. For more information, see
Traffic Control."
Unicast and multicast traffic flooding is not blocked. For more information, see
"Configuring Port-Based Traffic Control."
No secure ports are configured. For more information, see
Traffic Control."
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
Default Settings After Initial Switch Configuration
Chapter 26, "Configuring Port-Based
Chapter 26, "Configuring Port-Based
Chapter 27, "Configuring CDP."
Chapter 29, "Configuring UDLD."
Chapter 30, "Configuring SPAN and
Chapter 31, "Configuring RMON."
Chapter 33, "Configuring SNMP."
Chapter 35, "Configuring Network Security
Chapter 37, "Configuring QoS."
Chapter 38, "Configuring
Chapter 39, "Configuring IP Unicast
Chapter 41, "Configuring HSRP and
Chapter 46, "Configuring MSDP."
Chapter 47, "Configuring Fallback
Chapter 26,
Chapter 32,
Chapter 45,
1-19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst blade 3130Catalyst blade 3032

Table of Contents