Setting Up the Network Configurations
This section describes how to set up the network configurations for use with
various networks.
For details on the LAN Setup menu, see "LAN Setup Menu" (page 54).
For details on configurations, consult with the system administrator.
LAN (Connecting via DHCP)
Configuration example
LAN1
Set "DHCP Mode" to "Auto" under Page 1/2 of the General screen in the LAN
Setup menu.
LAN Setup
General
1/2
Page:
DHCP Mode
Host Name
IP Address
Network Mask
Gateway Address
DNS Address
The setting has been configured properly if the IP address appears in the
launcher menu.
To connect
Select "Single" under "Dial Mode", enter the remote party's IP address, and
dial.
DHCP server 1
2005.12.28 12:34
Auto
.
.
.
.
.
.
.
.
.
.
.
.
Save
Cancel
Setting Up the Network Configurations
LAN2
65