Chapter 3: Resolved Service Requests; Oms-V 2.3 Resolved Service Requests; Link Connection Between 2.3 And 2.3 Switches Is Shown As; Table 5: Oms-V 2.3 Resolved Service Requests - Nortel V2.3 Release Note

Chapter 3: Resolved Service Requests

OMS-V 2.3 Resolved Service Requests

The OMS-V R2.3 MR1 introduces solutions for the following major customer
impacting SRs.

Table 5: OMS-V 2.3 Resolved Service Requests

SR Number
10174857
10176058
10077699
10174616
10174857 OMS_V was unable to create more than one UPC contract
From the Front Panel View, One UPC contract was configured. Trying to
configure the second UPC, the following error message appeared:
This problem has been corrected.
10176058 Link Connection Between 2.3 and 2.3 Switches is shown as Uni-
Directional
With using discovery over ethernet or qaa1, with 2 or more IP types up on VSS,
the Magellan Networks submap displays a bi-directional connection as uni-
directional.
This is solved by using a SPANS address to discover a new link. SPANS signal
paths must be configured to discover new links.
10077699 It takes too long to reflect network changes on VSM Magellan
submap
Some changes in the status of switches or links took more than the configured
polling interval to update, when using default intervals. Improvements to the
discovery process have been made to enhance the speed to reflect network
changes.
Description
OMS_V was unable to create more than one UPC contract
Connection Between 2.3 and 2.3 Switches is shown as Unidirectional
It takes too long to reflect network changes on VSM Magellan submap.
Unable to Configure CDAS or AVR From The Front Panel View
The switch is running a software version
that does not support UPC Tables. This
feature requires at least version 3.4.0.
Magellan Vector OMS-V 2.3 Release Notes
17