Clear All Parameter Notifications; Get System Status - Lexicon RV-8 V1.10 - SERIAL COMMUNICATIONS PROTOCOL DEFINITION REV 1-7 Manual

Lexicon, Inc.
RV-8 Serial Communications Protocol

7.3.21 Clear All Parameter Notifications

Request to the RV-8 to disable all RV-8 parameter notifications.
7.3.21.1 Command Packet Description
Application Header:
Command
Data Count
Application Data:

7.3.22 Get System Status

Request to RV-8 for its current system status. RV-8 will respond with "System Status Packet".
7.3.22.1 Command Packet Description
Application Header:
Command MC_CMD_GET_SYS_STATUS
Data Count 0
Application Data:
7.3.22.2 System Status Response Packet
Application Header:
Command MC_RESP_SYS_STATUS 0x94
Data Count 10
Application Data:
Data[0]
Data[1]
Data[2]
Data[3]
Data[4]
Data[5]
Data[6]
Data[7]
Data[8]
Data[9]
7.3.22.3 Data Description
System Volume:
Data Type:
Max:
Min:
Current Input:
Data Type:
Definition/Conversion:
© 2005 Lexicon, Inc. All rights reserved.
MC_CMD_CLEAR_ALL_PARAM_NOTIFICATIONS 0x3D
0
N/A
N/A
System Volume
Current Input
Current Effect Id
Current Input Sample Rate nn
Current Input Format
Mute Active
Effect Bypass
Left/Right Balance
Front/Back Balance
Video Sync
Signed 8 bit integer (2's compliment)
+12 (0x0C) (12 dB)
-80 (0xB0) (-80 dB)
Unsigned 8 bit integer
Appendix D RV-8 Input Ids
Printed on: 07/26/05
0x00
0x3E
0x00
0x0A
nn
nn
nn
nn
nn
nn
nn
nn
nn
29 of 72