Status Menus - Lexicon RV-5 User Manual

Basic Operation
TUNER STATUS
The Tuner status indicates the current frequency,
band, listening mode and volume level. The
Tuner status takes the place of the two-line status
display for inputs using the built-in tuner.

STATUS MENUS

Pressing the remote control STAT2 button opens the STATUS menu
for the current input source of the Main Zone, which contains
parameters that provide information about the current input source
and listening mode. STATUS menus are available for 2-channel,
Dolby Digital, DTS(-ES) and 5.1 analog input sources. Unlike most
other menus, STATUS menus cannot be opened through the
selection of menu options. Rather, the remote control STAT2 button
must be pressed.
To open and navigate the STATUS menu for the current input
source:
1. Under Zone 2 page 2, press "STAT2." The first page of the
STATUS menu for the current input source appears in the on-
screen and front-panel displays.
If the STATUS menu includes a second page, the PG1 indicator
appears in the top-right corner of the menu. Press the STAT2
button to open the second page. If the STATUS menu does not
include a second page, pressing the STAT2 button closes the
menu. If this occurs, begin again with step 1.
2. When the desired STATUS menu page has been opened, press
the remote-control Menu
downward through the complete list of available parameters.
2-28
DVD1 90.9 FM
L7 MUSIC -34dB
and arrows to scroll upward and
Note:
STATUS menu parameters provide information about the current
input source and listening mode. These parameters cannot be
adjusted.
3. Press the STAT2 button or the Menu
STATUS menu. If the second page of the STATUS menu opens,
press the STAT2 button or the Menu
STATUS menu.
STATUS menu descriptions begin on the next page. The table
beneath each description lists the default and possible settings
for each parameter. STATUS menu parameter descriptions
begin on page 2-33. STATUS menu level meters are described
on page 2-34.
Lexicon
arrow to close the
arrow again to close the