60: Output Protocol; Output Protocol - Intermec EasyCoder 4630 User Manual

4630 and 4830 Coax/Twinax Interface Card User's Manual
Notes: A space is allowed between hex bytes, but is not
included in the string.
The command strings are sent to the printer when the
character identifier U and the string number (for
example, &%U3) are in the data sent to the pirnter.
The strings may specify a custom command to be sent
directly to the printer. The command will be sent
prior to the data if it is placed as the first printable
data in the format (position 1, line 1).
To change a custom user string, send command 55
with the new values—the old string is automatically
changed.

60: Output Protocol

Purpose: Specifies the output protocol of the interface card for
converting host commands.
Syntax: Z60,n
n =
0 IBM PPDS
1 Epson ESC/P2
2 Hewlett-Packard PCL
5 IBM Proprinter 4201/2
6 Epson LQ, 24 pint
7 Epson DFX+
8 Epson 9 pin (DFX)
9 Generic (default)
Example: &%Z60,9
Selects generic protocol.
Notes: The interface card is designed to use setting 9, generic
protocol, when installed in the Intermec 4630 or 4830
printer. Do not change this setting.
1-14