SINTERIT LISA X Original User Manual page 81

355
LaserCalibrationFailed
338
HeatersTestFailPiston0
-
-
-
-
The laser is failing
the self-check.
Piston heater is failing the
self-check.
The cake is somewhat hard
and slightly burned.
Orange peel effect on the
surface of the printout.
The printouts' physical
properties differ from
expectations.
The cake has been sintered
entirely solid.
General failure of the laser.
Dislocated heater in the
Print Bed.
Incorrect settings.
Incorrect settings.
Incorrect settings.
Pyrometer failure.
Sinterit Lisa X SLS 3D Printer Original User Manual | 81
Printer must be sent in for
service. Contact After Sales
for assistance.
Printer must be sent in for
service. Contact After Sales
for assistance.
Adjust the print temperature
in Sinterit Studio (0,5-1
degree in either direction).
Read and apply the model
positioning rules available
in Sinterit Studio.
Read and apply the model
positioning rules available
in Sinterit Studio.
Printer must be sent in for
service. Contact After Sales
for assistance.