SINTERIT LISA X Translation Of The Original Manual
Sls 3d printer
Hide thumbs
Also See for LISA X:
- Original user manual (87 pages) ,
- Translation of the original user manual (62 pages) ,
- Short user manual (12 pages)
Subscribe to Our Youtube Channel
Related Manuals for SINTERIT LISA X
Summary of Contents for SINTERIT LISA X
- Page 1 LISA X SLS 3D printer Translation of the original short manual Please read the user manual before using the product. Version 10/2022...
-
Page 2: Table Of Contents
To learn more about specific features of your printer and read the latest version of the user manuals, please visit our website www.sinterit.com/support-page/. Sinterit disclaims any liability resulting from the lack of knowledge provided in the full manual. - Page 3 The floor in the working area must be antistatic. IMPORTANT! Information essential to correctly perform a specific task. Information essential to correctly perform a specific task. IMPORTANT! Be sure to read the instructions in this user manual carefully. Sinterit LISA X User Manual | 3...
-
Page 4: Printer Overview
FEED BED RESET BUTTON USB PORT DOOR OVERFLOW CONTAINER Fig. 1.1 View of the front of the printer, heating module, print chamber, and overflow container. PYROMETER WINDOW Fig. 1.2 View of the pyrometer window. Sinterit LISA X User Manual | 4... -
Page 5: Preparing To Print
While preparing the printer for use, it is necessary to read and acknowledge any messages on the screen. Disregarding or skipping any crucial steps of the process can negatively impact the quality of printouts or damage the printer. Sinterit LISA X User Manual | 5... -
Page 6: Choosing The File To Print
2.2 Choosing the file to print IMPORTANT! In order to print, you will need a file prepared in Sinterit Studio, which you can download from our website www.sinterit.com/software. Select PRINTING from the main menu and press ADD NEW PRINT JOB. -
Page 7: Preparing The Print Chamber
Press START PRINT. Before printing, an automatic component check will be performed. You can stop the process at any time, just press ABORT PRINTING. ATTENTION! If anything during the printer operation concerns you, press the E-STOP button and contact our after sales team: support@sinterit.com Sinterit LISA X User Manual | 7... -
Page 8: Removing And Cleaning The Printout
The screen may display a message about the maintenace time of the components. For more information consult the full instruction manual, and our website: www.sinterit.com/support/. Press GOT IT. If the message hasn’t appeared, it means that at present no components require any maintenance. -
Page 9: Cleaning The Printer
The vacuum cleaner used to collect the powder must be suitable for handling combustible dust. Sinterit recommends the ATEX Vacuum Cleaner available in the offer. Press the arrow buttons to move the recoater and collect the remaining powder underneath. Press DONE. -
Page 10: Technical Support
In case of any questions or issues, please don’t hesitate to contact our After sales team: • e-mail: support@sinterit.com • phone: +48 570 702 886 The full list of resellers and technical support in select countries can be found at www.sinterit.com/contact. Sinterit LISA X User Manual | 10... - Page 11 SINTERIT Sp. z o.o. ul. Nad Drwina 10 bud. B3, 30-741 Krakow, Poland www.sinterit.com Contact: +48 570 967 854...
Need help?
Do you have a question about the LISA X and is the answer not in the manual?
Questions and answers