Expert Mode" Features; Control Panel; No Wizard; Skip Self-Check - SINTERIT LISA X Original User Manual

14.5 "Expert mode" features

14.5.1 Control panel

• In Expert Mode, a control panel for the Beds position
and Recoater position is provided. Control is done
manually by using the sliders on the screen.
• This mode allows convenient control during service
operations such as replacement of components or
cleaning.
• Remember safety rules when using this panel.

14.5.2 No Wizard

• When Expert Mode is activated there is no wizard on
launching the printing process.
• There are no standard user guides.
• To speed up the process, all necessary functions for
each printing stage are collected in specific submenus.
• All steps are manually controlled.

14.5.3 Skip self-check

Expert Mode allows you to skip self-checks, which shortens the time of preparation for printing. Skipping this step exposes
you to a greater chance of printing failure and should be done only when you are sure that heating elements, cords and
other printer components are in perfect condition and their condition allows for successful printing.
Fig. 14.5 Screen confirming Expert Mode is disabled.
Fig. 14.6 Control panel in the Expert Mode.
Fig. 14.7 Self-directed work in Expert Mode.
Sinterit Lisa X SLS 3D Printer Original User Manual | 75