First Start-Up; Powering On And Starting The Printer - SINTERIT LISA X Original User Manual

1
5

5. FIRST START-UP

IMPORTANT!
When the printer is turned on for the first time, a short introduction will be shown on the screen,
allowing you to familiarise yourself with the machine's operation.
IMPORTANT!
The accessories in the Dedicated Powder Tools, recommended when working with the printer, are
not part of the printer you purchased. For more information, visit our website: www.sinterit.com.

5.1 Powering on and starting the printer

WARNING!
Lisa X is supplied with 230 [V]. If you wish to connect the machine to
110 [V], use the voltage converter included with the printer.
1. Connect the printer to power (fig. 5.1.1).
2. Flip the power button on the back of the printer to the "1" position.
Fig. 5.1 Connecting the power cable to the power socket and turning on the printer.
2
1
2
3
6 7
Fig. 4.1 Unpacking the Lisa X printer.
1
3
2
Sinterit Lisa X SLS 3D Printer Original User Manual | 21
4
8