Advertisement
Quick Links
Advertisement
Related Manuals for SINTERIT LISA X RECOATER STRIP RETROFIT
Summary of Contents for SINTERIT LISA X RECOATER STRIP RETROFIT
- Page 1 RECOATER STRIP RETROFIT ASSEMBLY MANUAL...
- Page 2 1 pc M3x6 screws 14 pcs M3x8 black screws 2 pcs You will need: • Allen key 2.0, 2.5, 3.0, 4.0 mm • Wrench/socket wrench 5.5 mm • Brush or compressed air Sinterit LISA X Recoater strip retrofit | 2...
- Page 3 Recoater’s roller. 12. Using a 4 mm allen key unscrew the two screws holding the Recoater to the bearing (fig. 5). 13. Take out the Recoater. Set the metal spacer aside. Sinterit LISA X Recoater strip retrofit | 3...
- Page 4 16. Clean the surface of the Recoater (Isopropyl alcohol or vacuum cleaner). 17. Screw the Levelling slider in place of the Tribotape. Use the two M3x6mm screws from the supplied kit and the 2.5 mm allen key (fig. 7). Sinterit LISA X Recoater strip retrofit | 4...
- Page 5 19. Using a 2.5 mm allen key loosen the two screws of the Recoater base on the right side of the Recoater (fig. 9) and remove it. unscrew 2.5 [mm] Fig. 9 Removing the Recoater base. Sinterit LISA X Recoater strip retrofit | 5...
- Page 6 24. Using a 2 mm allen key and two M3x8 screws, fasten the black cover onto the Recoater (fig. 11). screw 2.0 [mm] Front side of the printer Back side of the printer Fig. 11 Installing the new Recoater black cover. Sinterit LISA X Recoater strip retrofit | 6...
- Page 7 Slide the Recoater strip into the gap between the knurled roller and the Driver slider (Fig 13 & 14). Don’t bend the strip too much - it might break! Fig. 13 Inserting Recoater strip to Recoater Fig. 14 Inserting Recoater strip to Recoater part 2. part 1. Sinterit LISA X Recoater strip retrofit | 7...
- Page 8 Similarly, position the second end of the Recoater strip to the angle bracket. Using a 2 mm allen key and two Mx6 screws, pre-screw the Recoater strip onto the angles (fig. 17). Sinterit LISA X Recoater strip retrofit | 8...
- Page 9 Read the message carefully then click on GOT IT and SAVE. Now you can print using the Recoater Strip. Fig. 18 Recoater Strip activation I. RECOATER STRIP Fig. 19 Recoater Strip activation II. Sinterit LISA X Recoater strip retrofit | 9...
- Page 10 SINTERIT Sp. z o.o. ul. Nad Drwina 10/B-3, 30-741 Krakow, Poland www.sinterit.com...
Need help?
Do you have a question about the LISA X RECOATER STRIP RETROFIT and is the answer not in the manual?
Questions and answers