Advertisement
Quick Links
Advertisement
Related Manuals for SINTERIT LISA X RECOATER BLADE KIT
Summary of Contents for SINTERIT LISA X RECOATER BLADE KIT
- Page 1 RECOATER BLADE KIT ASSEMBLY MANUAL...
- Page 2 Linear bearing washer II 1 pc 1 pc (SB013196A) (SB013170A) You will need: • Allen key 2.0, 2.5, 4.0 mm • Brush or compressed air • Box or zip-lock bag for part Sinterit LISA X Recoater blade kit | 2...
- Page 3 TIP: If you do not have enough space, move the Recoater using the steering arrows on the control panel (MAINTENANCE/CONTROL PANEL). unscrew 2.0 [mm] Fig. 3 Unscrew the screw of the Recoater cord plate. Sinterit LISA X Recoater blade kit | 3...
- Page 4 Fig. 5 Screw the Recoater blade with the Linear bearing washer I onto the bearing. 17. Assess the gap between the Recoater blade and the print chamber. The correct value should be between 0.8 and 1.5 mm (fig. 6). Sinterit LISA X Recoater blade kit | 4...
- Page 5 Recoater Blade (right side). Fasten everything with two M6x10 screws with the serrated washers (fig. 8). Fig. 8 Linear bearing washer II installation location (front and bottom view of Recoater blade). Sinterit LISA X Recoater blade kit | 5...
- Page 6 Select the RECOATER WITH BLADE checkbox (fig. 11). Read the message carefully then click on GOT IT and SAVE. Now you can print using the Recoater blade. Fig. 10 Recoater blade activation I. Sinterit LISA X Recoater blade kit | 6...
- Page 7 Fig. 11 Recoater blade activation II. Sinterit LISA X Recoater blade kit | 7...
- Page 8 SINTERIT Sp. z o.o. ul. Nad Drwina 10/B-3, 30-741 Krakow, Poland www.sinterit.com...
Need help?
Do you have a question about the LISA X RECOATER BLADE KIT and is the answer not in the manual?
Questions and answers