Expert Mode; Important Safety Information; Enabling "Expert Mode - SINTERIT LISA X Original User Manual

14. EXPERT MODE

This mode makes it possible to disable the printer's security features and shorten processes, including but not limited to
skipping process steps and disabling security mechanisms, allowing direct use of manual control of Recoaters and bed
positions, in particular when the Safety System is disabled.
As there are serious risks associated with the use of this mode, please acknowledge and follow the safety rules below.
If there is any other person besides you using the printer, pay special attention to Chapter 14.3 Multi-users.

14.1 Important safety information

WARNING!
• Expert Mode involves the possibility of bypassing the printer's security features.
• The Expert Mode is intended only for people with extensive experience in working with the
Sinterit printer!
• Incompetent use of this mode can be a direct cause of accidents. Risks include the possibility
of mechanical crushing, tearing and severe burns leading to personal injuries including even
fatal accidents.
WARNING!
• While using this mode, pay the utmost attention to the Sinterit printer and its
working process.
• Do not put any body parts including but not limited to limbs, or any elements,
appliance parts, etc. into the movement zone of mechanical parts!
WARNING!
• Do not force open the chamber before the cooling process is completed!
• In the case of early completion of the printout by skipping the cooling stage,
please take into account that the printout has a temperature of about 150 [°C]
/ about 300 [°F].
• Processing prints before they have cooled is very dangerous.
WARNING!
• By activating Expert Mode, you unequivocally confirm that you accept all of the risks involved
and that your decision to disable the printer's safety features is fully informed and conscious.
• Use Expert Mode solely at your own risk.

14.2 Enabling "Expert mode"

IMPORTANT!
• Expert Mode is available only to Sinterit Studio Advanced users.
• To run the mode, first read the security rules.
• Make sure that the printer has the latest available software version.
1. Select SETTINGS from the main menu and press MORE OPTIONS.
2. Find and press the EXPERT MODE tab.
3. Move the slider to the right to activate the mode OFF
4. Read carefully and confirm the safety rules – it's important! (fig. 14.2).
ON (fig. 14.1).
Sinterit Lisa X SLS 3D Printer Original User Manual | 73