Final Steps Before Printing - SINTERIT LISA X Original User Manual

IMPORTANT!
• If the printout requires it, connect the source of inert
gas to the inlet nipple.
• Press the CHECK PRESSURE button to verify the
inert gas control system.
• If the inert gas control system is incorrectly
connected, a proper message will appear.

6.6 Final steps before printing

ATTENTION!
If anything during the printer operation concerns you, press the E-STOP button and contact our
After Sales team: support@sinterit.com.
1. Press the RESET button on the printer, in order to activate the security system.
2. Press START PRINT (fig. 6.12). Before printing, an automatic component check will be performed (fig. 6.13).
3. You can stop the process at any time, just press ABORT PRINTING.
PRINTING - OPEN THE LID
CAMERA VIEW
Fig. 6.12 The START PRINT screen.
MODEL NAME PUMP_01
MATERIAL PA12
INTROGEN NO
PRINTING TIME 23:34:23
LAYER 1543/3455
START PRINT
PRINTING - CONNECT THE INERT GAS SOURCE
PRINTING - SUMMARY
TEXT
TEXT
TEXT
TEXT
TEXT
TEXT
Fig. 6.11 The SELF-CHECK screen before printing.
Sinterit Lisa X SLS 3D Printer Original User Manual | 30
CHECKING PRESSURE
CHECKING ... (35%)
CHECKING...