Radio Equipment Information - SINTERIT LISA X Original User Manual

3.4 Radio equipment information

Sinterit Sp. z o. o. hereby declares that the radio device used in the Lisa X printer complies with the RED Directive
2014/53/EU.
The full text of the EU Declaration of Conformity is available at the end of this manual.
The device has a built-in Wi-Fi network card (IEEE 802.11b/g/n/ac 2.4/5 GHz), model TL-WN722N.
Frequency bands supported
2400 - 2483 [MHz]
5150 - 5850 [MHz]
Software² Sinterit Studio
Supported file types STL, 3MF, OBJ, 3DS, FBX, DAE
Output file types *.scode, *.sspf, *.sspfz
OS compatibility Microsoft Windows 10 or higher
COMMUNICATION
LCD screen 9" interactive touchscreen
On-board camera Built-in
Connectivity Wi-Fi / Ethernet / USB
HEATING SYSTEM
Independent
Max temperature in the chamber 210 [°C] / 410 [°F]
Certificates
Output power
<20.0 [dBm]
<23.0 [dBm]
SOFTWARE
4 modifiable zones: print chamber, print surface, cylinder
and piston - 16 independent heating elements
SAFETY
CE
FDA
ATEX (for Performance Set)
IEC Protection Class: Class 1
IP Code: IP20
Sinterit Lisa X SLS 3D Printer Original User Manual | 19