Download
Share
Print this page
  1. Manuals
  2. Brands
  3. SINTERIT Manuals
  4. 3D Printers
  5. Lisa X
  6. Original user manual

SINTERIT LISA X Original User Manual

Sls 3d printer
Hide thumbs Also See for LISA X:

Advertisement

Quick Links

Download this manual
Sinterit
SLS 3D PRINTER
Original user manual
Please read the manual before using the product.
For the most up-to-date manual,
visit our website: www.sinterit.com/support/

Advertisement

loading
Need help?

Need help?

Do you have a question about the LISA X and is the answer not in the manual?

Questions and answers

Related Manuals for SINTERIT LISA X

Summary of Contents for SINTERIT LISA X

  • Page 1 Sinterit SLS 3D PRINTER Original user manual Please read the manual before using the product. For the most up-to-date manual, visit our website: www.sinterit.com/support/...

  • Page 2: Table Of Contents

    In order to ensure safe and efficient operation of Sinterit’s devices and products, please make sure to follow the instructions and safety guidelines outlined in this manual. Please be sure to keep this document for future reference. Table of Contents 1.
  • Page 3 18.2 Disclaimer ....................................83 18.3 Trademarks ....................................83 19. Terms of warranty ..............................84 20. Centre of gravity of the Lisa X device .......................... 85 20.1 The device with the lid closed ..............................85 20.2 The device with the lid open ..............................85 21. EC/EU Declaration of Conformity ..........................86...

  • Page 4: General Information

    1.1 Intended and unintended use Sinterit Lisa X is a compact 3D printer, making use of the selective laser sintering (SLS) technology in additive manufacturing (AM) processes. In its operation, it uses powdered polymers as the source material. The device enables professional and quick manufacturing of physical 3D objects from their digital models in a professional setting.

  • Page 5: Marking Text Conventions Used In The Document And The Machine

    High temperature – do not touch. Excess heat dissipation can cause burns. ATTENTION! Beware of moving parts which can crush hands. ATTENTION! Beware of sharp edges which can cause body cuts and injury. ATTENTION! Beware of intense light. Sinterit Lisa X SLS 3D Printer Original User Manual | 5...
  • Page 6 Information essential to correctly perform a specific task. IMPORTANT! You must read the instructions before taking action. ATTENTION! Sinterit products and materials may not be suitable for disposal in municipal waste. Sinterit Lisa X SLS 3D Printer Original User Manual | 6...

  • Page 7: Glossary

    After Sales team: support@sinterit.com. WARNING! • To ensure the safe use of the Sinterit Lisa X 3D printer, please read and follow the instructions below. • Always keep the user manual within reach on the device. Keep it for future use.

  • Page 8: Environment And Place Of Installation

    For optimal and safe operation, please observe the conditions listed in Chapter 3.1 Operating requirements. ATTENTION! • The Sinterit set of devices, including the Lisa X 3D Printer (hereafter Lisa X), is not intended for use in an explosive atmosphere. • The possibility of an explosive atmosphere is anticipated inside the device.

  • Page 9: Personal Protection

    In the event of the cable being replaced, make sure it is protected against water spray and check mechanical strength. • Disconnect the power cable whenever it is planned to shift/transfer the machine. Sinterit Lisa X SLS 3D Printer Original User Manual | 9...

  • Page 10: Safety Requirements While Using The Lisa X Printer

    It is recommended to use UPS units that, in the case of a momentary power failure, will allow the printing process to finalise. ATTENTION! Tle Lisa X printer must always be connected to a grounded outlet to prevent electric shock in the event of a fault. 2.5 Safety requirements while using the Lisa X printer WARNING! •...

  • Page 11: Safety During Repair And Maintenance

    The built-in oxygen level sensor is not a certified safety device and cannot be used as the sole alarm in the event of an emergency. Sinterit printers with an inert gas control system may only be used in well-ventilated areas.

  • Page 12: Working With Powders

    ATTENTION! Health risk! • When working with the polyamide powder or other designated printer powder for the Sinterit Lisa X printer, always wear personal protection dedicated to this device (protective glasses, protective gloves, protective dust mask). • Inhalation of the dust can cause serious lung problems. To prevent dust from being inhaled or swallowed at all times, always wear a dust mask.

  • Page 13: Working With Hazardous And Potentially Hazardous Powders

    Match the extinguishing medium and the extinguishing equipment to the general conditions on-site. • Sinterit recommends using Dry Chemical Powder (ABE/BE) or Carbon Dioxide extinguishers for electrical extinguishing devices. Sinterit Lisa X SLS 3D Printer Original User Manual | 13...

  • Page 14: Safety Plates (Specification Tag And Symbols)

    Clean these with cloth, soap, and water. Do not use solvents, diesel fuel, or petrol. • Replace the damaged plates with new ones supplied by Sinterit. If a plate is attached to a replaced part, make sure a new plate is affixed to the new part.

  • Page 15: Lisa X - General Information

    If you place the product by the wall, the distance between the product and the wall should be greater than 50 [cm] / 20 [in]. • The product will not work properly if it is set at an angle. Sinterit Lisa X SLS 3D Printer Original User Manual | 15...

  • Page 16: Description

    Fig. 3.1 Front view of the printer, heating module and Overflow Bin. *Marked elements may be different or not installed, depending on printer revision. Pyrometer window Fig. 3.2 View of the print chamber. Sinterit Lisa X SLS 3D Printer Original User Manual | 16...
  • Page 17 T-type push-in fitting with a pressure sensor Filter air dehydrator Rotamerer Throttle check valve Pressure reducer regulator with built-in manometer Pneumatic solendoid valve Pneumatic tubing Fig. 3.5 View of the inert gas control system. Sinterit Lisa X SLS 3D Printer Original User Manual | 17...

  • Page 18: Specification

    ADDITIONAL PRINTER FEATURES Inert gas control system built-in Average inert gas consumption 0.48 [m /h] = 8 [l/min.] Coupling installed in Lisa X Pneumatic quick-coupling Male Plug Nipple DN 7.2 Sinterit Lisa X SLS 3D Printer Original User Manual | 18...

  • Page 19: Radio Equipment Information

    IP Code: IP20 3.4 Radio equipment information Sinterit Sp. z o. o. hereby declares that the radio device used in the Lisa X printer complies with the RED Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the end of this manual.

  • Page 20: Unpacking Lisa X

    4. UNPACKING LISA X WARNING! The device weighs approx. 150 [kg]. Two adults will be needed to unpack the Lisa X printer properly and safely. WARNING! When driving the printer down/up the gangway, check carefully that the wheels are in the guides.

  • Page 21: First Start-Up

    5.1 Powering on and starting the printer WARNING! Lisa X is supplied with 230 [V]. If you wish to connect the machine to 110 [V], use the voltage converter included with the printer. Connect the printer to power (fig. 5.1.1).
  • Page 22 OPEN TH DOOR Fig. 5.3 Lifting the printer lid. Fig. 5.4 Removing the box with accessories. Remove the Start up box with the laser protective glass and other accessories (fig. 5.4). Sinterit Lisa X SLS 3D Printer Original User Manual | 22...

  • Page 23: Mounting The Laser Protective Glass

    Lock the laser protective glass in place by mounting and tightening the two quick release nuts. Lift the heating module. Secure the heating module with the captive screw/split pin. LASER PROTECTIVE GLASS Fig. 5.5 Mounting the laser protective glass. Sinterit Lisa X SLS 3D Printer Original User Manual | 23...

  • Page 24: Connecting The Printer To The Wi-Fi Network

    – the icon shows the current temperature in • • Unlock Overflow – a button to unlock the Overflow the print chamber. Bin security electrolock in the drawer; Sinterit Lisa X SLS 3D Printer Original User Manual | 24...
  • Page 25 MAINTENANCE – here you can check component service life and perform Lisa X maintenance. UNLOCK LID 25°C CLEAN REMOVE THE PRINTER PRINTOUT MAINTENANCE PRINTER PRINT JOB STATUS HISTORY UNLOCK OVERFLOW UNLOCK DOOR Fig. 5.8 The MAINTENANCE screen. • CLEAN THE PRINTER – choose this option if you want •...

  • Page 26: Preparing To Print

    Before starting any work with powder, always wear adequate protective clothing, eyewear, face mask, and gloves. • A suitable set is included in the Dedicated Powder Tools for Lisa X. 6.2 Check before printing While preparing the printer for use, make sure that the Overflow Bin has been emptied.

  • Page 27: Choosing The File

    6.3 Choosing the file IMPORTANT! In order to print, you will need a file prepared in Sinterit Studio, which you can download from our website: www.sinterit.com/software. Select PRINTING from the main menu and press ADD NEW PRINT JOB. Choose the new file (USB or UPLOADED from Sinterit Studio) or recently used file (RECENT) (fig. 6.1).

  • Page 28: Preparing The Print Chamber

    6.5 Preparing the print chamber ATTENTION! Risk of crushing hands! • The moving Recoater can cause hand injuries. • Be careful not to crush your hands when closing the printer lid. Sinterit Lisa X SLS 3D Printer Original User Manual | 28...
  • Page 29 Fig. 6.10 Clean the Recoater guide bars. Fig. 6.11 Wipe the pyrometer window. Make sure no miscellaneous items (i.e. spatulas) remain in the print chamber, then close the lid. Press DONE. Sinterit Lisa X SLS 3D Printer Original User Manual | 29...

  • Page 30: Final Steps Before Printing

    PA12 TEXT INTROGEN TEXT PRINTING TIME 23:34:23 TEXT LAYER 1543/3455 TEXT CHECKING... START PRINT CAMERA VIEW Fig. 6.12 The START PRINT screen. Fig. 6.11 The SELF-CHECK screen before printing. Sinterit Lisa X SLS 3D Printer Original User Manual | 30...

  • Page 31: During Printing

    Unlock the E-STOP button. The opening is not possible until the temperature inside drops below 50[°C]. Wait, and then press the REMOVE PRINTOUT or UNLOCK LID button (fig. 7.3). Sinterit Lisa X SLS 3D Printer Original User Manual | 31...

  • Page 32: Removing And Cleaning The Printout

    10 seconds to open it before the lock activates again. Push on the lid and pull it up using the handle (fig. 8.2). Fig. 8.2 Lifting the printer lid. Sinterit Lisa X SLS 3D Printer Original User Manual | 32...
  • Page 33 11. Clean the printout of unsintered powder. You may use the accessories provided in Dedicated Powder Tools. Fig. 8.5 Moving the IO BOX to the Foldable Tray or to the PHS worktop to clean the printout. Sinterit Lisa X SLS 3D Printer Original User Manual | 33...

  • Page 34: Cleaning The Printer

    POSITION BEDS button POSITION BEDS to begin the positioning process of the Beds. For cleaning the printer Sinterit recommends dedicated solutions: the Multi PHS (Powder Handling Station) or ATEX/ Intertek Vacuum Cleaner with Separator (fig. 9.2). Sinterit Multi PHS...
  • Page 35 DONE DONE Fig. 9.4 Clean the print chamber using PHS/Multi PHS or the ATEX Vacuum Cleaner with Separator. IMPORTANT! Keep the PHS/Vacuum hose inlet just above the powder surface. Sinterit Lisa X SLS 3D Printer Original User Manual | 35...

  • Page 36: Cleaning The Overflow Bin

    If you want to know how much fresh powder you need to add to the used powder press SHOW REFRESH INFO. If you wish to instead do that another time, press SKIP. Sinterit Lisa X SLS 3D Printer Original User Manual | 36...

  • Page 37: Remove Material

    Print Bed. Using a 2 [mm] allen key, unscrew both screws on the Recoater cover and take it off (fig. 10.3). Gently remove the black cover from Recoater (fig. 10.4). Sinterit Lisa X SLS 3D Printer Original User Manual | 37...
  • Page 38 14. Collect the remaining powder in the print chamber with the suction hose with dedicated nozzles. 15. Press the arrow buttons to move the Recoater and collect the remaining powder underneath (fig. 10.7). 16. Once the print chamber is clean, press DONE. Sinterit Lisa X SLS 3D Printer Original User Manual | 38...
  • Page 39 Fig. 10.10 The notice informing you whether sealing maintenance will be required. 24. Good job. The printer has been thoroughly cleaned and is ready to print in other material. Sinterit Lisa X SLS 3D Printer Original User Manual | 39...

  • Page 40: Printing With Specialty Powders

    11.1 Inert gas connection to the printer Certain powders used in the Sinterit Lisa X printer need a protective atmosphere. In this situation, an inert gas connection is required. Powders in the Sinterit range that require an inert gas connection are PA11 Onyx, PA11 CF and PA11 ESD.

  • Page 41: Printing From Flexible/Rubber-Like Materials (Flexa)

    Recoater – this prevents powder from sticking to it during printing. • the laser protective glass – powder vapour can settle on the glass and increase the likelihood of print failure. Sinterit Lisa X SLS 3D Printer Original User Manual | 41...

  • Page 42: Powder Refreshment

    13. CHECK POWDER CONTAINER starts flashing. Open the door and make sure that the metal container is in its place and that it is empty. 14. Close the PHS/Multi PHS door. Sinterit Lisa X SLS 3D Printer Original User Manual | 42...

  • Page 43: Powder Refreshment With The Powder Sieve Or A Metal Strainer

    13. Repeat steps 1, 7-12 three times (skip adding fresh powder) to make sure the powder is thoroughly mixed and sifted. 14. The received powder is ready to use. Remember to store the powder only in a tightly closed metal container. Sinterit Lisa X SLS 3D Printer Original User Manual | 43...

  • Page 44: Lisa X Maintenance

    INERT GAS REOCATER CORD 30/200 h PRINT BED SEALING 30/200 h SELF CHECK Fig. 13.2 The PRINTER STATUS screen. Fig. 13.3 The SELF CHECK screen. Fig. 13.4 The ERRORS screen. Sinterit Lisa X SLS 3D Printer Original User Manual | 44...

  • Page 45: Cleaning The Pyrometer Window

    After 10 seconds the electrolock will reactivate and it will no longer be possible to lift the lid. If you still want to open the printer, slide the UNLOCK LID button again on the printer screen. Sinterit Lisa X SLS 3D Printer Original User Manual | 45...

  • Page 46: Cleaning The Laser Protective Glass

    The timer will reset to zero (fig. 13.7). Fig. 13.6 Select the LASER PROTECTIVE GLASS position Fig. 13.7 The screen of the maintenance to start the maintenance. of the laser protective glass. Sinterit Lisa X SLS 3D Printer Original User Manual | 46...
  • Page 47 15. Secure the heating module with the captive screw/split pin. 16. Good job. The maintenance timer will reset to zero. LASER PROTECTIVE GLASS Fig. 13.8 Cleaning the laser protective glass. Sinterit Lisa X SLS 3D Printer Original User Manual | 47...

  • Page 48: Recoater Maintenance

    Press POSITION RECOATER again to set it on the hinge side of the printing chamber, near the end. 10. Gently remove the old Recoater strip. 11. Slide the new Recoater strip under the angle brackets (far side first) (fig. 13.12). Sinterit Lisa X SLS 3D Printer Original User Manual | 48...

  • Page 49: Recoater Short Cord Replacement

    (fig. 13.15). Fig. 13.14 Select the RECOATER MAINTENANCE position Fig. 13.15 The screen of the maintenance to start the maintenance. of the Recoater (roller and cord). Sinterit Lisa X SLS 3D Printer Original User Manual | 49...
  • Page 50 14. Next, wipe the Recoater roller using cloth soaked in Fig. 13.19 Use the cloth and ethyl alcohol to clean the Recoater ethyl alcohol (fig. 13.19). Press DONE. roller, when it is above the Feed Bed. Sinterit Lisa X SLS 3D Printer Original User Manual | 50...
  • Page 51 29. Wind the Recoater cord on the roller tracing wheel (fig. 13.23). 30. Check if anything is blocking the slide of the cord. 31. Pull the cord to tense the spring. Fig. 13.23 Installing a new Recoater cord. Sinterit Lisa X SLS 3D Printer Original User Manual | 51...

  • Page 52: Replacing The Print Bed Sealing

    In this case, mark MAINTENANCE DONE once you have completed the procedure, and then the DONE button. The timer will reset to zero (fig. 13.26). Fig. 13.26 The screen of the maintenance of the Print Bed sealing. Sinterit Lisa X SLS 3D Printer Original User Manual | 52...
  • Page 53 15. Using a 2.5 [mm] allen key, unscrew and remove four screws securing the Print Bed cover (fig. 13.30). 16. Remove the Print Bed cover. You can use the metal spatula (from Dedicated Powder Tools) to pry up and remove the cover (fig. 13.31). Sinterit Lisa X SLS 3D Printer Original User Manual | 53...
  • Page 54 Fig. 13.35 Press on the fibreglass rope with a spatula. 22. Put on the Print Bed cover (fig. 13.36). 23. Using a 2.5 [mm] allen key, tighten the four screws securing the Print Bed cover (fig. 13.37). Sinterit Lisa X SLS 3D Printer Original User Manual | 54...

  • Page 55: Replacing The Feed Bed Sealing

    Once the positioning process is finished, confirm that both Beds are in their topmost position. From now on, do not close the lid until the maintenance is done! Fig. 13.39 The POSITION BEDS screen. Sinterit Lisa X SLS 3D Printer Original User Manual | 55...
  • Page 56 17. Remove the used fibreglass rope around the Feed Bed. You can use the metal spatula to help pull out the sealing (fig. 13.44). 18. Vacuum powder from the Feed Bed. Use appropriate nozzles (fig. 13.45). Sinterit Lisa X SLS 3D Printer Original User Manual | 56...
  • Page 57 Fig. 13.48 Put on the Feed Bed cover. Fig. 13.49 Tighten the four screws securing the Feed Bed cover. 24. Good job. The maintenance timer will reset to zero. Sinterit Lisa X SLS 3D Printer Original User Manual | 57...

  • Page 58: Cleaning The F-Theta Scanning Lens

    Unscrew the two quick release nuts. Make sure you hold the laser protective glass, otherwise it may fall (fig. 13.51.3). Fig. 13.51 Lower the heating module and remove the laser protective glass to access the F-Theta scanning lens. Sinterit Lisa X SLS 3D Printer Original User Manual | 58...

  • Page 59: Replacing The Infrared Bulbs

    PRINTER STATUS INFRARED BULBS. On the screen, a drawing will appear with the Infrared bulb(s) requiring replacement highlighted. Mark the MAINTENANCE DONE and then the DONE button (fig. 13.55). Sinterit Lisa X SLS 3D Printer Original User Manual | 59...

  • Page 60: Checking The Tension Of The Recoater Drive Unit Cord (Rev. A-B)

    Using a 2 [mm] allen key remove the four screws securing the access panel on the top side of the printer (fig. 13.57). Remove the access panel on the top side of the printer (fig. 13.58). Sinterit Lisa X SLS 3D Printer Original User Manual | 60...
  • Page 61 13. Using a 2 [mm] allen key, tighten back the four screws securing the access panel on the top of the printer (fig. 13.62). Fig. 13.61 Mount back the access panel. Fig. 13.62 Tighten the back four screws of the access panel. 14. Good job. The maintenance timer will reset to zero. Sinterit Lisa X SLS 3D Printer Original User Manual | 61...

  • Page 62: Checking The Tension Of The Recoater Drive Unit Cord (Rev. C)

    Using a 2 [mm] allen key remove the four screws securing the access panel on the top side of the printer (fig. 13.66). Remove the access panel on the top side of the printer (fig. 13.67). Fig. 13.66 Remove four screws from the access panel. Fig. 13.67 Remove the access panel. Sinterit Lisa X SLS 3D Printer Original User Manual | 62...
  • Page 63 17. Using a 2.5 [mm] allen key, tighten back the six screws securing the access panel on the right side of the printer (fig. 13.73). Fig. 13.72 Mount back the access panel. Fig. 13.73 Tighten back six screws of the access panel. Sinterit Lisa X SLS 3D Printer Original User Manual | 63...

  • Page 64: Recoater Drive Belt Gt2 Maintenance

    Using a 2.5 [mm] allen key, remove the six screws securing the access panel on the back side of the printer (fig. 13.76). Remove the access panel on the back side of the printer (fig. 13.77). Fig. 13.76 Remove six screws from the access panel. Fig. 13.77 Remove the access panel. Sinterit Lisa X SLS 3D Printer Original User Manual | 64...
  • Page 65 Fig. 13.79 Unscrewing and removing the access panel on the top side of the printer. 18. Now you have access to the tensioning mechanism. To tension the belt, first loosen the four marked nuts, using a 7 [mm] socket screwdriver (fig. 13.80). Sinterit Lisa X SLS 3D Printer Original User Manual | 65...
  • Page 66 22. Using a 7 [mm] socket screwdriver, tighten back the four nuts of the tensioning mechanism. 23. Mount back the access panel on the top side of the printer. Make sure to slide it under the print chamber gasket (fig. 13.82). Sinterit Lisa X SLS 3D Printer Original User Manual | 66...

  • Page 67: Cleaning The Back Inspection Panel

    If the panel is installed, you can use the step-by-step guide (press FOLLOW GUIDE) or perform the required cleaning yourself. In this case, mark MAINTENANCE DONE once you have completed the procedure, and then the DONE button. The timer will reset to zero (fig. 13.88). Sinterit Lisa X SLS 3D Printer Original User Manual | 67...
  • Page 68 Fig. 13.90 Remove the access panel. Thoroughly vacuum the interior behind the panel with the ATEX/Intertek Vacuum Cleaner. Use an appropriate nozzle (fig. 13.91). Fig. 13.91 Thoroughly clean behind the panel. Sinterit Lisa X SLS 3D Printer Original User Manual | 68...

  • Page 69: Cleaning The Recoater Roller

    Intertek Vacuum Cleaner. Remove remaining powder from the Print and Feed Beds. Use steering arrows to move the Recoater to clean the area under it (fig. 13.95). Sinterit Lisa X SLS 3D Printer Original User Manual | 69 Fig. 13.95 Use PHS/Multi PHS or Powder Separator with ATEX/Intertek Vacuum Cleaner to clean the print chamber.

  • Page 70: Replacing The Reflector Sealing

    On the PRINTER STATUS tab, select the REFLECTOR SEALING position. Mark MAINTENANCE DONE to complete the cleaning procedure, and then the DONE button. The timer will reset to zero (fig. 13.99). Sinterit Lisa X SLS 3D Printer Original User Manual | 70...
  • Page 71 14. Remove the plastic paper and place the sealing carefully around the hole (fig. 13.103). Do not stretch the seal when gluing! 15. Press the seal carefully on each side. Sinterit Lisa X SLS 3D Printer Original User Manual | 71...

  • Page 72: Spare Parts For Lisa X

    Consumables kit – Extended spare parts kit, extra charge. IMPORTANT! Sinterit reserves the right to alter availability of spare parts without prior notice. Please contact our After Sales department for assistance, if you think you require a replacement item not listed above or in the current offer.

  • Page 73: Expert Mode

    WARNING! • While using this mode, pay the utmost attention to the Sinterit printer and its working process. • Do not put any body parts including but not limited to limbs, or any elements, appliance parts, etc.

  • Page 74: Multi-Users

    OFF). 10. To confirm whether deactivation has been completed please see if the Expert Mode icon in the upper left corner has disappeared and check the SETTINGS (fig. 13.5). Sinterit Lisa X SLS 3D Printer Original User Manual | 74...

  • Page 75: Expert Mode" Features

    Sinterit Lisa X SLS 3D Printer Original User Manual | 75...

  • Page 76: Hot Printouts

    14.7 “Expert mode” - Liability limitation To the maximum extent permissible by applicable law any liability of Sinterit and its directors, officers, employees, agents and representatives in connection with the Expert Mode is limited to damages caused by Sinterit willful misconduct.

  • Page 77: Industry 4.0 Api

    “signal”: -54, “ResultOk”: true “errors”: [ “id”: 1074790757, “code”: 357, “is_critical”: true, “raise_time”: “2023-01-01T00:00:00”, “description”: “FeedBed lost steps detected” “printer_serial_number”: “0000000000”, “software_version”: 522, “last_printout_start_time”: “2023-01-01T00:00:00”, “last_printout_finish_time”: “2023-01-01T00:00:00”, “estimated_printout_finish_time”: “2023-01-01T00:00:00” Sinterit Lisa X SLS 3D Printer Original User Manual | 77...

  • Page 78: Scode Upload

    Only scode files are allowed – you are trying to send an improper file; • Not enough free space, try to remove old scode first – not enough space on the printer internal disk. IMPORTANT! Send only files generated in Sinterit Studio. Sinterit Lisa X SLS 3D Printer Original User Manual | 78...

  • Page 79: Troubleshooting

    Flash drive connected – There is a possibility to: select print jobs from it, select update files from it, copy the logs from the printer to it, and send them to the Sinterit Support in case of problems. Remote Support Service – Remote Support Service enables the Sinterit Support Team to remotely access the printer.

  • Page 80: Common Issues

    The powder is visibly Replace the sealing. Feed Bed sealing worn out pouring out of the Feed Bed Instructions available in the or damaged. down into the printer. manual. Sinterit Lisa X SLS 3D Printer Original User Manual | 80...
  • Page 81 Incorrect settings. positioning rules available expectations. in Sinterit Studio. Printer must be sent in for The cake has been sintered Pyrometer failure. service. Contact After Sales entirely solid. for assistance. Sinterit Lisa X SLS 3D Printer Original User Manual | 81...

  • Page 82: Packaging Lisa X For Shipping

    Attach the power cable to the flight case cover. Fold the gangway and attach the flight case cover. Lock the flight case lid latches. Secure the flight case with foil and tape. Sinterit Lisa X SLS 3D Printer Original User Manual | 82...

  • Page 83: Legal Information

    18.1 General legal information Where this manual refers to Sinterit or the Company or “us/our”, this means Sinterit sp. z o.o. with its legal seat in Krakow, registered by the District Court for Kraków-Śródmieście in Krakow, XI Commercial Division of the National Court Register under number: 535095, NIP (tax number): 6793106416.

  • Page 84: Terms Of Warranty

    You are responsible to check the usability and fitness of the print-out for the intended purpose. Sinterit shall neither be liable for any damage caused by any malfunction of the printed part nor for any of them being unfit for the specific use or purpose.

  • Page 85: Centre Of Gravity Of The Lisa X Device

    Nad Drwiną 10 30-741 Kraków Materiał Status Nazwisko Data Working Konstruował: Masa Nr rys. Ernest Kowalski 29.01.2021 003846 146,969 kg NAZWA Sprawdził: 003846 Skala Format Rewizja Arkusz Zatwierdził: 1 z 1 Sinterit Lisa X SLS 3D Printer Original User Manual | 85...

  • Page 86: Ec/Eu Declaration Of Conformity

    21. EC/EU DECLARATION OF CONFORMITY Sinterit Lisa X SLS 3D Printer Original User Manual | 86...
  • Page 87 SINTERIT Sp. z o.o. ul. Nad Drwina 10/B-3, 30-741 Krakow, Poland www.sinterit.com...