Components; Front Panel - Teldat Regesta Smart PRO Manual

2 Product Overview
• AC Version ("AC" models)
• Nominal: 110 - 240 VAC
• Absolute: 85 - 264 VAC
• Frequency : 50 - 60 Hz
• Power: 10 W
• DC Version ("DC" models)
• Nominal: 12 - 72 VDC
• Absolute: 9 - 80 VDC
• Power: 10 W
• MR Version ("MR" models)
• Nominal: 110 - 240 VAC, 48 - 72 VDC
• Absolute: 85 - 264 VAC, 40 - 85 VDC
• Frequency : 50 - 60 Hz (VAC)
• Power: 10 W
• Dying Gasp Alarm to alert users of power failures or disconnections of the power supply cable. Please note that
an additional accessory is required to activate this function.
• LAN: The RJ45 connector supports IEEE802.3 Ethernet standards for copper wiring, including 10Base-T,
100Base-TX, and 1000Base-T.
• WAN: Gigabit Ethernet Combo RJ45+SFP connector:
• The RJ45 connector supports IEEE802.3 Ethernet standards for copper wiring, including 10Base-T,
100Base-TX, and 1000Base-T.
• SFP port supports the 1000Base-X Fiber Ethernet standard using SFP modules.
• Switch: Depending on the model. ("6" Models)
• 4xRJ45 connectors support IEEE802.3 Ethernet standards for copper wiring, including 10Base-T, 100Base-TX,
and 1000Base-T.
• Serial Ports.
• 1xRJ45 connector RS-232 port (DCE).
• 2xRJ45 connectors for RS-232 port (DCE) and/or RS-485 (2/4 wires). Please note that an additional accessory is
required to activate this function.
• WWAN: Depending on the model. ("L" models)
• 1xLTE Category 4 WWAN module with two SMA connectors.
• 2 Internal SIM trays with 2FF form factor.
• External Reset/Recovery push button

2.4 Components

2.4.1 Front Panel

The front panel is equipped with various status LEDs to provide visual indications of the device's operating status.
Refer to the figure below for a detailed view of the front panel layout.
8
Teldat S.A.
Regesta Smart PRO