Teldat Regesta Smart PRO Manual page 37

4 Connecting the Router
32
• Configure the Ethernet interface of your IP terminal (typically a PC) with an IP
address in the range of 192.168.1.2 and 192.168.1.254, and set the subnet
mask to 255.255.255.0 (e.g., 192.168.1.2, 255.255.255.0).
• Connect the Ethernet interface of the IP terminal to the router's WAN connect-
or using the Ethernet cable (RJ45) provided.
• Initiate a Telnet session from the IP terminal to the default IP address,
192.168.1.1 (for the Regesta Smart PRO).
• No credentials (username/password) are required to access the console under
the default configuration.
Teldat S.A.
Regesta Smart PRO